KTM Swingarm Tab Protector Installation Instructions

Required Tools: 8 & 10mm socket and ratchet.

  1. Using a 8mm socket and ratchet, remove the two bolts from the lower chain guide mount at the swingarm tabs.
  2. Clean the area and let it dry. (This is a good opportunity to clean your chain and inspect for cracks in your lower chain guide mounting tabs.)
  3. Install the 3DC Moto tab protector with the provided hardware and the 10mm Socket and ratchet.  Torque to factory spec.
  4. Go get dirty!

Tab Protector Installed

Front View

Share this:

Like this:

Like Loading...