Menu
Menu
$30.00
The 3D Concepts Moto SLAKR Chain Slack Tensioner makes working on your bike even easier! No need to take measurements anymore. Place the tensioner at the back end of your chain sliding guard and make your adjustments. As you tighten the chain, the green range of the tool will start to show. Once green is in the top of the viewing window, it is good to go. If you over tighten, red will start to show at the top of the window… once that happens, it is too tight. Simple! The window is on either side of the tool body. Our tensioner tool is made to KTM, Husky, GasGas factory chain tolerances. No need to find that manual you lost. The Chain Protector Kit will have to be removed or un-mounted to use this tool (EXC-F models). This tool is for all KTM/Husky/GasGas models that have a 55-58mm chain tension tolerance.
CAUTION: If you have a 2023-2024 with a linkage, the chain slack in the manual is wrong! Please see our 65-68mm Chain Slack Tool.
In stock
The 3D Concepts Moto SLAKR Chain Slack Tool makes working on your bike even easier! No need to take measurements anymore. Place the tool at the back end of your chain sliding guard and make your adjustments. As you tighten the chain, the green range of the tool will start to show. Once green is in the top of the viewing window, it is good to go. If you over tighten, red will start to show at the top of the window… once that happens, it is too tight. Simple! The window is on either side of the tool body. Our tensioner tool is made to KTM, Husky, GasGas factory chain tolerances. No need to find that manual you lost. This tool is for all KTM/Husky/GasGas models that have a 55-58mm chain tension tolerance.
Chain Tool Features:
| Weight | 0.0533 kg |
|---|---|
| Dimensions | 5 × 3.5 × 3.5 cm |
Only logged in customers who have purchased this product may leave a review.
Phone: 903-647-4926
Email: [email protected]
Reviews
There are no reviews yet.