SLAKR 65-68mm Chain Slack Tool KTM/Husky/GasGas

The 3D Concepts Moto SLAKR Chain Slack Tensioner makes working on your bike even easier! No need to take measurements anymore. Place the tensioner at the back end of your chain sliding guard and make your adjustments. As you tighten the chain, the green range of the tool will start to show. Once green is in the top of the viewing window, it is good to go. If you over tighten, red will start to show at the top of the window… once that happens, it is too tight. Simple! The window is on either side of the tool body. Our tensioner tool is made to KTM, Husky, GasGas factory chain tolerances. The Chain Protector Kit will have to be removed or un-mounted to use this tool (EXC-F models). This tool is for all KTM/Husky/GasGas models that have a 65-68mm chain tension tolerance.

CAUTION: The maintenance manual states 55-58mm for all 2023-2024 bikes with a swingarm linkage. THIS IS INCORRECT. The tolerance displayed on this tool will alleviate stress on your sprocket countershaft and reduce wear on your engine.